exhaust tips
Leverage 1142.7

end of page

Cromwell Molding Company
27546 State Highway 23
Paynesville, MN 56362-9780
Phone 320-243-4965

52″ from firewall to back of body,

42″ from door to door,

27″ tall in back,

and 25″ tall to dash.

45 pounds.

Mocking up the car to review scale and dimensions. these are not the wheels. nor is the dog house the engine. they are place holders for viewing..
we also spread the wheels out to see what that looked like. we like the “shorty” version
we also tried on an engine, but decided it was too heavy and a lot more work to make a cool engine
No Exposed Engine.. Hood with Exposed Chrome Headers like this car
we also received our first load of metal and have begun to erect the structure to lift the car
10/29/12
Scale models of Car Geometry for review
all car components are to actual size. Geometry is close to accurate.
we are seeking volkswagen rims or secondly a small thin donut spare tire for front and regular size donuts for rear with half moon caps. will paint side walls white.
we decided to go with black headers ordered 10/30
Poles are in place and ready for tabs
getting primed and ready for paint
Hub Cap Annies
Vintage Steering wheel off ebay Ordered 10/30
SKETCHUP MODEL  Car 2 11.08.12https://www.dropbox.com/s/3pylx33mg5oth08/Car%202.skphttps://www.dropbox.com/s/3pylx33mg5oth08/Car%202.skphttps://www.dropbox.com/s/3pylx33mg5oth08/Car%202.skphttps://www.dropbox.com/s/3pylx33mg5oth08/Car%202.skphttps://www.dropbox.com/s/3pylx33mg5oth08/Car%202.skphttps://www.dropbox.com/s/s8be2c5fsnpuojy/Car%20LEver.skpshapeimage_31_link_0shapeimage_31_link_1shapeimage_31_link_2shapeimage_31_link_3
axles (they don’t turn)
locating Headers and pattern for hood cowling
tabs and plates in from machine shop
more metal in to begin beam and fulcrum
Frames made ready for wire mesh
11/8/12
11/18/12
Frame being prepared for prime
Framing the Engine Compartment
Car getting headers locating components on frame
here is the big beam that will be the lever
this is the “Pin” the shaft that will be what it all pivots on.
this is one of the two Dampener pistons for triaal
here is the structure coming together.
the car is close to paint and the metal works are coming together
tank in place
fitting hood skin
THE FULCRUM
Blue Straps chosen

blue

11/27/12
primed
wet sand
paint
white wall tires
main support welded up
wheels to help support large frame when it opens
the certified welder welded up everything tacked...
click to review certification
Hinges for frame
Lever “T”
Seats Went in
Gauges yet to be installed as well as gear shift
in lowest postion end of lever is at the top of a typical door 81”
car tire 5” off floor
we feel to make the car to be lifted off the floor higher
stand by for more images while we adjust the environment
END OF PIPE Rope Mechanism
a note previous reflects “no pulley on end of pole” the pulley was a concept thought and could not be worked into budget.
the idea behind the pulley was to be able to have the pull rope out of the way when planning for an event to have access through this area without the rope being an intrusion.
some type of “Hook” that the rope can be hung on is the idea we are working on.
Hook #1 a rod welded up top with a slight hook up to hang rope on.
blue strap is representative of big rope
Hook #2 a metal cut out so nothing is “Poking out”
12/3/12
SILVER “metal” lever arm
Pick it up Lever
1,2 and Effort all graphics both sides
Confirm Car Positions
End of Lever at 10 feet off floor
the Down Position
End of Lever at 81”feet off floor (top of a typ door)
the UP Position
shots
space in back and front of car
12/4/12
 

Home > Tie-Rod Hydraulic Cylinders > 2 Inch Bore= > Dalton 2 x 8 ASAE Hydraulic Tie Rod Cylinders

Dalton 2 x 8 ASAE Hydraulic Tie Rod Cylinders
2" Bore X 8" Stroke ASAE DALTON Hydraulic Tie Rod Cylinder


Empty

Amount in Cart: $0.00


View Cart

Checkout



Manufacturer


SKU

DBH-2008-A-AM

 Bore: 

2"


 Stroke: 

8"


 Rod Dia: 

1.125"


 Retract: 

20.25"


 Ports: 

3/8 NPTF


 Pin Dia: 

1"


E-mail a friend about this item.


Part #: DBH-2008-A-AM

Only $44.95

You save $34.00



Quantity 2


DALTON 2500PSI Hydraulic Tie Rod Cylinder Features:

  1. •Double-Acting

  2. •Superior quality chrome-plated & polished rod

  3. •Honed & Finished Steel Tube

  4. •Top-Quality Seals

  5. •90 Day Warranty

  6. •Side Ported

  7. •Standard Color is Red Primer


Questions or Comments?

 

 
both ends the same
147” measure from here
want triangle round rod , closed ring
12/10/12
Custom Straps arrived today
awaiting Pistons and Mesh for frames
we have cut an opening in the top of the beam and made custom fit concrete blocks for counterweight.
Setting the Pistons
Setting the stop points
Mesh welded and ready for Powder coating
12/20/12
The Structure is complete and has undergone final welding. small parts such as hooks for ropes are left. parts are now being disassembled to go to powder coating.
1/3/13
License plates arrived
What’s left?
Test Fit blue straps to car
Powder coat Turnbuckles
Make Pull Ropes
Receive Metal from Powder Coater
Cut Diamond Plate for Sign Background
Paint Letters
Reassemble all and Tweak